Zooch Automotive Stafford: ADAS Calibration & Precision Wheel Alignment

    Zooch Automotive is a workshop-based specialist at Unit 7 Tollgate Drive, Tollgate Industrial Estate, Stafford, ST16 3HS. Our principal work is ADAS camera, radar and sensor calibration and precision laser four-wheel alignment, alongside vehicle diagnostics and coding and tyre supply and fitting.

    This page answers the questions we are asked most often by drivers and by trade customers, so you can decide whether the work you need is something we can help with before you call.

    Business details

    Workshop address

    Zooch Automotive
    Unit 7 Tollgate Drive
    Tollgate Industrial Estate
    Stafford, ST16 3HS

    Opening hours

    Monday to Friday: 09:00–17:00
    Saturday: by appointment
    Sunday: closed

    What we do

    ADAS calibration and precision wheel alignment are our principal specialisms. Diagnostics, coding and tyre work support them, so a vehicle can often be measured, calibrated and refitted in one visit where coverage and capacity allow.

    ADAS calibration

    Camera, radar and sensor calibration carried out where the applicable vehicle manufacturer procedure requires it, using static and dynamic methods according to that procedure.

    ADAS calibration information

    Precision laser four-wheel alignment

    All four wheels measured with laser alignment equipment and adjusted to the manufacturer's specification where adjustment is provided, with a before and after report.

    Wheel alignment information

    Vehicle diagnostics and coding

    OBD2 fault code scanning, dashboard warning light diagnosis and ECU coding or programming, with a diagnostic report explaining what the vehicle has recorded.

    Tyre supply and fitting

    Premium, mid-range and budget tyres for cars, vans and 4x4s, fitted with wheel balancing, TPMS checks or resets where applicable and responsible disposal of old tyres.

    Tyre supply and fitting information

    ADAS calibration explained

    Advanced Driver Assistance Systems use cameras, radar and sensors to support the driver. Typical features include lane keeping assist, automatic emergency braking, adaptive cruise control, blind spot monitoring, parking sensors and cameras, and traffic sign recognition. Many modern vehicles use one or more of them.

    When calibration may be required

    Calibration is carried out where the applicable vehicle manufacturer procedure requires it, for example after windscreen replacement or camera disturbance, following collision repair, after suspension, geometry or wheel alignment work, after sensor removal or replacement, or where diagnosis identifies a relevant fault.

    Warning lights do not automatically mean calibration is required; diagnosis comes first. There is also no blanket rule that every vehicle needs ADAS calibration for an MOT.

    Static and dynamic calibration

    Static calibration is completed in the workshop with targets set to the vehicle procedure; dynamic calibration is completed by driving the vehicle under specified conditions. Both methods are used according to the vehicle procedure. Many calibrations take around one to two hours, which is an estimate rather than a guarantee.

    Vehicle coverage

    We have broad multi-make coverage including Audi, BMW, Mercedes, Volkswagen, Ford and Vauxhall. Coverage varies by system and model year, so please confirm the registration or VIN when booking and we will check the applicable procedure before your appointment.

    Precision wheel alignment explained

    Wheel alignment is about the angles at which the wheels sit, not balancing or rotating tyres. Tracking usually refers to toe adjustment or checking, while a full four-wheel alignment measures and, where adjustable, corrects the relevant geometry across the vehicle.

    Symptoms worth checking

    Pulling to one side, a steering wheel that sits off-centre, wandering at speed, uneven or rapid tyre wear, or a noticeable change after a pothole, kerb or speed bump. These symptoms can also come from tyres, brakes, suspension, steering, loading or road camber, so we inspect and measure before recommending work.

    What an alignment can and cannot do

    Alignment corrects geometry that is out of specification where adjustment is provided, which often reduces uneven tyre wear and improves handling. It does not always eliminate pulling, because tyre pressure or conicity, brakes, suspension, steering, loading and road camber may all contribute.

    Our process and report

    We inspect tyres and suspension components and test drive the vehicle, measure all wheel angles with laser equipment against the manufacturer's specification, adjust where adjustment is provided, then re-measure and give you a printout showing the before and after readings. Most alignments take around 45 minutes to an hour; times are estimates and depend on the vehicle, access, faults and preliminary checks.

    Who we work with

    Private customers

    Drivers come to us directly for alignment checks, ADAS calibration after other work, diagnostics for warning lights, and tyre supply and fitting. Appointments are arranged at our Unit 7 Stafford workshop.

    When booking, please have the registration and, where available, the VIN, plus details of any work already carried out and the symptoms you have noticed.

    Trade and work providers

    We welcome suitable enquiries from garages, bodyshops, windscreen-replacement companies, dealerships, fleet and leasing operators, insurers, accident-management companies and repair networks. Individual jobs and ongoing arrangements can both be discussed.

    Estimates, booking, calibration and alignment reports, status updates, invoicing and evidence requirements are agreed for the instruction. Acceptance depends on vehicle coverage, current capacity, technical requirements and commercial terms.

    Service area

    We serve Stafford and around a 30-mile radius. Work is carried out at the workshop, so vehicles come to us, and each booking depends on vehicle coverage and current capacity rather than distance alone.

    Primary areas

    Stafford, Stone, Eccleshall, Uttoxeter, Rugeley, Cannock, Penkridge, Great Haywood, Little Haywood, Hixon, Milford, Brocton, Colwich, Weston, Gayton, Burston, Doxey, Baswich, Walton-on-the-Hill and Weeping Cross.

    Extended coverage

    Cheadle, Newcastle-under-Lyme, Stoke-on-Trent, Trentham, Barlaston, Lichfield, Burton-upon-Trent, Tamworth, Telford, Market Drayton, Newport, Kidsgrove, Biddulph and Leek.

    Postcodes

    ST1-ST21, WS11-WS15, DE13-DE15, B77-B79, TF1-TF10.

    Common questions

    Talk to Zooch Automotive

    Call with your registration or VIN and we will confirm what your vehicle needs and whether we can help. Unit 7 Tollgate Drive, Tollgate Industrial Estate, Stafford, ST16 3HS. Monday to Friday 09:00–17:00, Saturday by appointment.

    Call 07898 072822